RHP 7315CTDUMP4 Precision Ball Bearings

Bearing Unit, Type:Pillow Type; Unit, Type:Insert Bearing Unit; Accessory:No Cover; Seal:Triple seals; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; Bearing Inner Dia. Shape:Cylindrical Bore Set; Days to Ship:8 Days; Grease Type:Standard Grease; Unit Body Material:Cast Iron;

Y1:1.96; D:210 mm; Da max:199 mm; rs min:2 mm; Number of lubrication holes:3; k:4.5 mm; Static load, C0:1,070 kN; Dynamic load, C:795 kN; Characteristic rolling element frequency, BSF:8.04 Hz; Min operating temperature, Tmin:-40 °C;

Outer ring oil hole:No; Basic Load Rating, Dynamic Rating(N):8300; Inner/Outer Ring Material:Steel; Rolling Element Material:Steel; Outer Ring:With Outer Ring; Days to Ship:6 Days or more; RoHS:6; Number of Raceway Ring Rows:Single Row; Rolling Element Material:Steel; Sealing Structure:No;

Symbol of Bearing Ring Shape:No symbol: Internal; Internal Clearance Symbol:C3 (Greater than nor; Number of Raceway Ring Rows:Single Row; Outer ring oil hole:Standard; Inner/Outer Ring Material:Steel; Cylinder shape (suffix symbol: X):No; Format symbol:NU (double brims for; d:25; Days to Ship:9 Days

B:82 mm; A2:89 mm; C:113.36 kN; J:260 mm; N:35mm; Recommended tightening torque for set screw:42 Nm; C0:76.8 kN; G:M10x1; L:195 mm; Designation of bearing:UC315G2L3;

s1:57.6 mm; C0:45 kN; d:70 mm; Designation of housing:FCE214-; T max.:100 °C; Designation of bearing:EX214G2T04; S:34.1 mm; C:62 kN; G:R1/8"; Weight:5.57 kg;

Weight:2.15 kg; B:41.2 mm; C:31.85 kN; L:120 mm; C0:20.8 kN; T min.:-20 °C; s1:20.6 mm; T max.:200 °C; G:M6x1; E:22 mm;

RoHS:6; Number of Bearings:Single; Width T(mm):18; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:Yes (with retaining; Volume Discount:Available; Volume Discount:Available; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea;

H2:108 mm; Designation of housing:P209N-; B:49.2 mm; Designation of closed end cover:SCC209; Designation of bearing:UC209-26G2L4; A:54 mm; N:17mm; T min.:-20 °C; s1:24.6 mm; N1:23 mm;

Diameter series symbol:Used for Light load; Accessory:No Cover; Accessory:No Cover; Pillow Type, Category:Centre Height; Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Cylindrical Bore Set; Surface Treatment:No; Diameter series symbol:Used for Light load; Stroke:No; Bearing Unit, Type:Pill

Min operating temperature, Tmin:-40 °C; ra max:1 mm; Characteristic rolling element frequency, BSF:5.33 Hz; Brand:SNR; Characteristic inner ring frequency, BPFI:5.91 Hz; Mass:0.45 kg; Characteristic outer ring frequency, BPF0:4.09 Hz; Nref:8,200 rpm; Da max:83.5 mm; D:90 mm;

B:34 mm; e:10 mm; B1:43.5 mm; A4:20.5 mm; T min.:-20 °C; d1:32.4 mm; A1:6 mm; A2:36.5 mm; G:M6x1; S:17 mm;

N1:16 mm; Weight:1.15 kg; T max.:200 °C; G:M6x1; L3:57 mm; H2:56 mm; s1:15 mm; Designation of bearing:US206-19G2T20; Designation of housing:T206-; L2:10 mm;

Weight:0.18 kg; B:31 mm; r:0.6; C1:4.4 mm; Recommended tightening torque for set screw:5.5 Nm; d:17 mm; C:16 mm; T min.:-20 °C; S:12.7 mm; T max.:100 °C;

Load Direction:Radial; Number of Raceway Ring Rows:Single Row; Rolling Element Material:Steel; Inner/Outer Ring Material:Steel; Internal Clearance Symbol:C3 (Greater than nor; Combination of two pieces:Standard; High-Speed Steel:Standard; Basic Load Rating, Dynamic Rating(N):150000; Large-capacity t